Removal and Replacement Procedures
2-14
HP ProLiant BL20p Generation 3 Server Blade Maintenance and Service Guide
4.
Install the heatsink (1) and close the heatsink locking levers (2).
CAUTION:
The heatsink is not reusable and must be discarded if removed from the
processor after application.
Figure 2-11: Installing the heatsink
Smart Array 6i Controller
To remove the Smart Array 6i Controller:
1.
Power down the server blade and remove it from the server blade enclosure. Refer to the
“Server Blade Preparation” section in this chapter.
2.
Remove the access panel. Refer to the “Access Panel” section in this chapter.
