background image

13

See your Warranty Booklet for the appropriate phone number in your area.

Service Information: For the latest version of this Guide, go to: http://www.procurve.com

Safety and Regulatory Statements

Safety Information

Grounding

If your LAN covers an area served by more than one power distribution system, be sure their safety 
grounds are securely interconnected.

LAN cables may occasionally be subject to hazardous transient voltages (such as lightning or disturbances 
in the electrical utilities power grid). Handle exposed metal components of the network with caution.

Servicing

There are no user-serviceable parts inside this product. Any servicing, adjustment, maintenance or repair must be 

performed only by service trained personnel.

This product does not have a power switch; it is powered on when the LAN cable is plugged in.

• details about the Radio Port's status and the 

status of the wireless services-enabled 
switch including the software (OS) version 
of the switch and any installed modules, a 
copy of the wireless services configuration,

• a copy of the switch Event Log,
• a copy of the switch status
• counters information

• Switch console (Wireless Services Configura-

tion Level): show command

• switch event Log
• Syslog server entry file, if configured

• copy of your network topology map, includ-

ing network addresses assigned to the rel-
evant devices

• your network records

Information Item

Information Location

Documentation reference symbol. If the product is marked with this symbol, refer to the product 

documentation to get more information about the product.

WARNING

A WARNING in the manual denotes a hazard that can cause injury or death.

CAUTION

A CAUTION in the manual denotes a hazard that can damage the equipment or create a non-compli-

ant condition.

Do not proceed beyond a WARNING or CAUTION notice until you have understood the hazardous 

conditions and have taken appropriate steps.

Summary of Contents for ProCurve Radio Port 210

























Reviews: