manualshive.com logo in svg

HP ProCurve 4100 Series, Function Manual

Share
Download
HP ProCurve 4100 Series Function Manual Download Page 63

3-19

Web and MAC Authentication for the Series 2600/2600-PWR and 2800 Switches

Configuring Web Authentication

Syntax:

[no] aaa port-access web-based [e] <

 port-list

>

Enables web-based authentication on the specified 
ports. Use the 

no

 form of the command to disable web-

based authentication on the specified ports.

Syntax:

aaa port-access web-based [e] <

 port-list

> [auth-vid <

vid

>]]

no aaa port-access web-based [e] <

 port-list

> [auth-vid]

Specifies the VLAN to use for an authorized client. The 
Radius server can override the value (accept-response 
includes a 

vid

). If 

auth-vid

 is 

0

, no VLAN changes occur 

unless the RADIUS server supplies one. 

Use the 

no

 form of the command to set the 

auth-vid

 to 

0

.

(Default: 0).

Syntax:

aaa port-access web-based [e] < 

port-list 

> [client-limit <1-32>]

Specifies the maximum number of authenticated 
clients to allow on the port. (Default:

 

1)

Syntax:

[no] aaa port-access web-based [e] < 

port-list 

> [client-moves]

Allows client moves between the specified ports under 
Web Auth control. When enabled, the switch allows 
clients to move without requiring a re-authentication. 
When disabled, the switch does not allow moves and 
when one does occur, the user will be forced to re-
authenticate. At least two ports (from port(s) and to 
port(s)) must be specified.

Use the 

no

 form of the command to disable client moves 

between ports under Web Auth control.
(Default:

 

disabled – no moves allowed)

Summary of Contents for ProCurve 4100 Series



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands