manualshive.com logo in svg

HP ProCurve 4100 Series, Function Manual

Share
Download
HP ProCurve 4100 Series Function Manual Download Page 136

6-4

Configuring Secure Shell (SSH)

Terminology

Terminology

■

SSH Server:

 A ProCurve switch with SSH enabled.

■

Key Pair:

 A pair of keys generated by the switch or an SSH client 

application. Each pair includes a public key, that can be read by 
anyone and a private key, that is held internally in the switch or by a 
client.

■

PEM (Privacy Enhanced Mode):

 Refers to an ASCII-formatted 

client public-key that has been encoded for portability and efficiency. 
SSHv2 client public-keys are typically stored in the PEM format. See 
figures 6-3 and 6-4 for examples of PEM-encoded ASCII and non-
encoded ASCII keys.

■

Private Key:

 An internally generated key used in the authentication 

process. A private key generated by the switch is not accessible for 
viewing or copying. A private key generated by an SSH client applica-
tion is typically stored in a file on the client device and, together with 
its public key counterpart, can be copied and stored on multiple 
devices.

■

Public Key:

 An internally generated counterpart to a private key. A 

device’s public key is used to authenticate the device to other devices.

■

Enable Level:

 Manager privileges on the switch.

■

Login Level:

 Operator privileges on the switch.

■

Local password or username:

 A Manager-level or Operator-level 

password configured in the switch.

■

SSH Enabled:

 (1) A public/private key pair has been generated on 

the switch (

crypto key generate ssh [rsa]

) and (2) SSH is enabled (

ip 

ssh

). (You can generate a key pair without enabling SSH, but you 

cannot enable SSH without first generating a key pair. See “2. 
Generate the Switch’s Public and Private Key Pair” on page 6-10 and 
“4. Enable SSH on the Switch and Anticipate SSH Client Contact 
Behavior” on page 6-15.)

Summary of Contents for ProCurve 4100 Series



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands