2-1
Installing the
Hu
b
2
Installing the Hub
The HP J3294A and HP J3295A 10/100 hubs are easy-to-install units. Each
comes with an accessory kit (HP P/N 5183-7210) that includes the brackets
for mounting the hub in a standard 19-inch telco rack or an equipment cabinet,
or on a wall, and it comes with rubber feet so it can be securely located on a
horizontal surface. The brackets are designed to allow mounting the hub in a
variety of orientations.
This chapter shows you how to install your 10/100 hub.
Included Parts
The 10/100 hub has the following components shipped with it:
■
HP ProCurve 10/100 Hubs Installation Guide
(5967-2280), this manual
■
Customer Support/Warranty booklet (5967-2242)
■
Accessory kit (5183-7210)
•
two mounting brackets
•
four 10 mm M4 screws to attach the mounting brackets to the hub
•
four 5/8-inch number 12-24 screws to attach the hub to a rack
•
four rubber feet
■
Power cord, one of the following:
Australia/New Zealand
United Kingdom
China
Continental Europe
Denmark
Japan
Switzerland
United States/Canada/Mexico
(8120-6803)
(8120-6801)
(8120-8377)
(8120-6802)
(8120-6806)
(8120-6804)
(8120-6807)
(8120-6805)
Roadhw0.bk : ROADHW2.FM Page 1 Thursday, May 28, 1998 5:40 PM
