HP ProBook 6450b Maintenance And Service Manual Download

Page: 164 / 216

System Configuration menu

NOTE:

Some of the listed System Configuration options may not be supported by your computer.

Select

To do this

Language

Change the Computer Setup language.

Boot Options

●

Set a Startup Menu delay (in seconds).

●

Enable/disable Custom Logo (disabled by default).

●

Enable/disable Display Diagnostic URL (enabled by
default).

●

Enable/disable CD-ROM boot (enabled by default).

●

Enable/disable SD Card boot (enabled by default).

●

Enable/disable floppy boot (enabled by default).

●

Enable/disable PXE Internal NIC boot (enabled by
default).

●

Set the Express Boot Popup delay in seconds.

●

Set the boot order.

Device Configurations

●

Enable/disable USB legacy support (enabled by default).
When enabled, USB legacy support allows the following:

◦

Use of a USB keyboard in Computer Setup even
when a Windows® operating system is not running.

◦

Startup from bootable USB devices, including a
hard drive, diskette drive, or optical drive
connected by a USB port to the computer.

●

Select a parallel port mode: ECP (Enhanced Capabilities
Port), standard, bidirectional, or EPP (Enhanced Parallel
Port).

●

Enable/disable fan always on while connected to an AC
outlet (enabled by default).

●

Enable/disable LAN Power Save (select models only).
When enabled, saves power by turning off the LAN
when not in use (enabled by default).

●

Enable/disable Data Execution Prevention. When
enabled, the processor can disable some virus code
execution, which helps to improve computer security.

●

SATA (Serial Advanced Technology Attachment) device
mode. The following options are available:

◦

AHCI (Advanced Host Controller Interface)

◦

IDE (Integrated Drive Electronics)

◦

RAID (select models only)

156

Chapter 5 Computer Setup

Summary of Contents for ProBook 6450b

























































































































































































































Search results

Summary of Contents for ProBook 6450b

Reviews:

Related manuals for ProBook 6450b

Brands by name

Popular brands

HP ProBook 6450b, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 6450b

Reviews:

Related manuals for ProBook 6450b

Brands by name

Popular brands