NOTE:
HP recommends that you create the USB Recovery Disk in the event of a system failure.
The Disk On Key used for this process should be 4 GB or larger.
Creating a USB Recovery Disk On Key
1.
Connect the USB Disk On Key to a USB port on the computer.
2.
Select
Computer
>
More applications
>
Tools
>
Create Recovery USB
.
3.
Enter the root password when prompted.
4.
Select
USB Disk On Key
from the list.
5.
Click
OK
.
6.
A question dialog will remind you that the data on the USB key will be destroyed. To continue,
click
OK
. Otherwise, click
Cancel
and back up the contents of the Disk On Key on another
computer.
7.
The backup process will display a status dialog box while the backup is in progress.
NOTE:
A file browser window with the Disk On Key Contents displayed will pop up when the
key is mounted. You may close the file browser window if desired. Once the USB Recovery Key
has been created, the status dialog will close. The USB Recovery Key is ready for use.
Recovering from a USB Recovery Disk On Key
CAUTION:
Before starting the Recovery process, make sure any data on the system to be
recovered has been backed up. The recovery process destroys all data on the system to be
recovered.
1.
Turn off the computer.
2.
Connect the USB Disk On Key to a USB port on the computer.
3.
Turn on the computer while holding down the
f9
key.
4.
Once the system has booted, the
Boot Options
menu should appear.
5.
Using the arrow keys, select
USB Disk On Key
and press
enter
.
NOTE:
The description may vary from one USB key to another. Any entry other than Optical
Disk Drive, Notebook Hard Drive or Notebook Ethernet should be the USB Recovery Disk On
Key.
6.
Once the USB Recovery Disk On Key has been selected, press
enter
. The USB Recovery Disk
On Key will boot.
7.
Once the USB Recovery Disk On Key has booted, a dialog box will prompt, “Do you want to start
the System-Restore?” If data on the computer has not been backed up, use the tab key and
select
No
. The system will reboot. Back up the system data and repeat the previous steps. If no
data should be saved from the computer, use the
tab
key to select
Yes
. Press
enter
to begin the
recovery process.
8.
After the files are copied to the system, follow the on-screen instructions.
SUSE Linux – Backup and recovery 121
