HP ProBook 4320t Administrator'S Reference Manual Download

Page: 88 / 94

Select

To do this

Built-In Device Options

●

Enable/disable the wireless button state (enabled by
default).

●

Enable/disable the embedded WLAN device (enabled
by default).

●

Enable/disable LAN/WLAN switching (disabled by
default).

●

Enable/disable the Network Interface Controller (LAN)
(enabled by default).

●

Set the wake on LAN state. Options include the
following:

◦

Disabled

◦

Boot to Network (set by default)

◦

Follow Boot Order

●

Enable/disable the optical disc drive (enabled by
default).

●

Enable/disable an audio device (enabled by default).

●

Enable/disable a modem device (enabled by default).

●

Enable/disable the microphone (enabled by default).

Port Options (all are enabled by default)

NOTE:

All port options are enabled by default.

●

Enable/disable the flash media reader.

●

Enable/disable the USB port.

CAUTION:

Disabling the USB port also disables

MultiBay devices and ExpressCard devices on the
advanced port replicator.

●

Enable/disable the ExpressCard slot.

●

Enable/disable the eSATA port.

Chapter 16 Computer Setup

Summary of Contents for ProBook 4320t































































































Search results

Summary of Contents for ProBook 4320t

Reviews:

Related manuals for ProBook 4320t

Brands by name

Popular brands

HP ProBook 4320t, Administrator'S Reference Manual

Search results

Summary of Contents for ProBook 4320t

Reviews:

Related manuals for ProBook 4320t

Brands by name

Popular brands