HP Pro x2 612 G1 User Manual Download

Page: 21 / 94

Right side

Component

Description

(1)

Audio-out (headphone)/Audio-in

(microphone) jack

Connects optional powered stereo speakers, headphones,

earbuds, a headset, or a television audio cable.

WARNING!

To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset. For

additional safety information, see the

Regulatory, Safety, and

Environmental Notices

. To access the user guides, select Start >

Help and Support > User Guides.

NOTE:

When a device is connected to the jack, the computer

speakers are disabled.

NOTE:

Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and audio-in

(microphone).

(2)

Docking connector

Connects an optional docking device.

(3)

USB 3.0 port

Connects an optional USB device, such as a keyboard, mouse,

external drive, printer, scanner or USB hub.

For details about different types of USB ports, see

Using a USB

device on page 44

Power keyboard 11

Summary of Contents for Pro x2 612 G1































































































Search results

Summary of Contents for Pro x2 612 G1

Reviews:

Related manuals for Pro x2 612 G1

Brands by name

Popular brands

HP Pro x2 612 G1, User Manual

Search results

Summary of Contents for Pro x2 612 G1

Reviews:

Related manuals for Pro x2 612 G1

Brands by name

Popular brands