97
Using the Setup Menu
USB Configuration
This setting determines how the camera is recognized when
connected to a computer.
1.
In the
Setup Menu
(page 93),
select
USB
.
2.
In the
USB Configuration
sub-menu, highlight one of these
two choices:
•
Digital Camera
—Causes the
computer to recognize the
camera as a digital camera using the Picture Transfer
Protocol (PTP) standard. This is the default setting on
the camera.
•
Disk Drive
—Causes the computer to recognize the
camera as a disk drive using the Mass Storage Device
Class (MSDC) standard. Use this setting to transfer
images to a computer that does not have the
HP Image Zone software installed on it (see
Transferring Images to a Computer without HP Image
Zone Software
on page 108). You may be unable to
use this setting with a Windows 98 computer that
does not have the
HP Image Zone software installed
on it.
3.
Press the
button to save the setting and return to the
Setup Menu
.
The new setting remains in effect until it is changed again,
even when you turn the camera off.
Downloaded From camera-usermanual.com HP Manuals
Summary of Contents for PhotoSmart M22
