20
hp photosmart 210 digital camera user’s guide
Using the Focus
The HP PhotoSmart 210 digital camera default setting is
Auto Focus
. You can change
the camera setting to
Macro
for a subject that is very close to the camera. The focus
setting is indicated by an icon on the status LCD.
To change the focus setting:
1. Slide the
mode
switch up to the camera icon.
2. Press the
menu
dial to display the Capture menu on the image LCD.
3. Turn the
menu
dial to highlight the current
Focus
icon, then press the
menu
dial.
4. Turn the
menu
dial to highlight the
Macro
or
Auto Focus
icon, then press the
menu
dial.
Note:
The focus setting is retained until it is changed or the camera is turned off.
Auto Focus
The camera will automatically focus
on the subject in the center of the viewfinder from
2 feet (.6m) to infinity.
Macro
For use on subjects that are within 4
inches to 3 feet (10cm to 1m) of the camera lens.
BlitzUG.book Page 20 Wednesday, July 12, 2000 2:59 PM
