Figure 2 LED Location on the 2–Port 10GbE Adapter Low-Profile and Full Height Bulkheads
LED Function
There are two (2) LED's per 10Gigabit Ethernet port on the AM225A, AM232A, and AM233A
adapters.
Table 4
explains their functionality:
Table 4 LED Functions
Description
LED Color
Function
Solid green indicates 10Gb Ethernet Link is established
Green
Link (LINK)
Blinking Amber indicates 10Gb Ethernet traffic
Amber
Activity (ACT)
On Board Jumpers and Dip Switches
There are no jumpers on board. There is one dip switch mounted.
Table 5
offers details for the dip switch:
Table 5 SW1 Dip Switch Functionality
Description
Pin Number
Dip Switch Reference
Designator
OFF — Single Function Enable (default)
Pins 1 and 6
1
ON — Multi Function Enable
OFF — RMII Clock Speed is 50MHz (default)
Pins 2 and 5
2
ON — RMII Clock Speed is 25MHz
Reserved
Pins 3 and 4
3
Installing the SFP+ Modules
SFP+ modules must be installed in the SFP+ module cages for both ports of the AM225A and
AM232A before cables can be attached.
LED Function
7
