HP PC460T, User Manual

Page: 10 / 83

6 7
Open the battery/memory card compartment at the bottom 2.
of the camera.
Insert the battery into the compartment with correct orientation 3.
as illustrated.
Close and lock the battery/memory card compartment. 4.
Inserting an SD/SDHC Memory Card
It is highly recommended that the camera storage is expanded by inserting a SD or SDHC memory card. These
memory cards are available at most consumer store and online locations.
Make sure to power off the camera before proceeding. Inserting the 1.
memory card while powered on may damage the card and camera.
Open the Battery/memory card compartment at the bottom of the camera. 2.
Insert the SD/SDHC card into the memory card slot with the metallic 3.
connectors facing the front side of the camera as illustrated below.
Push the SD/SDHC card into the memory slot until it clicks into place. 4.
If the card does not click into place, repeat the previous step to ensure
proper orientation.
Close the Battery/memory card compartment. 5.
To remove the SD/SDHC card
Make sure to power off the camera before proceeding. Removing the 1.
memory card while powered on may damage the card and camera.
Open the battery/memory card compartment. 2.
Gently push the card until it clicks and pushes our of position. 3.
Carefully pull out the card. 4.