Hard drive or solid-state drive mounting bracket
Description
Spare part number
Mounting bracket, solid-state drive
856013–001
Mounting bracket, hard disk drive
856012–001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement
Before disassembling the hard drive or solid-state drive, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the keyboard top cover (see
).
5.
Remove the hard drive or solid-state drive (see
Hard drive or solid-state hard drive on page 42
).
Remove the hard drive or solid-state drive mounting bracket:
1.
Remove the hard drive or solid-state drive cable from the device (1).
2.
Remove the four Phillips 3.0×3.7 screws (2).
3.
Remove the mounting bracket (3).
44
Chapter 5 Removal and replacement procedures for authorized service provider parts
Summary of Contents for Pavilion x360 m3-u000
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...