manualshive.com logo in svg

HP Pavilion x360 m3-u000, Maintenance And Service Manual

Share
Download
HP Pavilion x360 m3-u000 Maintenance And Service Manual Download Page 47

5.

Remove the five Phillips 2.4×5.7 screws (2).

6.

Turn the computer over and set it on the base with the keyboard facing up and the unit open.

7.

Use a case utility tool to carefully separate the keyboard top cover from the base enclosure (1).

8.

Raise the keyboard top cover slightly to access the TouchPad and keyboard cables (2).

CAUTION:

Raising the keyboard top cover too far or with too much force may damage the keyboard 

and TouchPad cables or their connectors.

9.

Release the ZIF (zero insertion force) connector (3) to which the TouchPad cable is attached, and then 
disconnect the TouchPad cable from the system board.

10.

Release the ZIF connector (4) to which the keyboard cable is attached, and then disconnect the 
keyboard cable from the system board.

Component replacement procedures

39

Summary of Contents for Pavilion x360 m3-u000
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands