HP Pavilion x360 m1-u000 Maintenance And Service Manual Download Page 10

Page: 10 / 90

Category

Description

HP Pavilion x360 m1

Convertible PC (model numbers

used m1-u100

through m1-1099)

HP Pavilion x360 m1

Convertible PC (model numbers

used m1-u000 through m1-

u099)

Graphics (continued)

Support for HD decode, DX12,
and high-definition multimedia
interface (HDMI) v1.4

√

Panel

11.6-in, high-definition (HD),
AntiGlare (AG) (1366×768), in-
plane switching (IPS)/UWVA,
white light-emitting (WLED),
slim (3.0-mm), TouchScreen
display panel with flush glass
and MultiTouch enabled; typical
brightness: 340 nits;

Support for eDP

√

Memory module

One memory slot, non-customer
accessible

Support for DDR4-2133 Single
Channel (only on computer
models equipped with an
Intel Core processor)

Support for DDR3L-1600 Single
Channel (only on computer
models equipped with an
Intel Pentium or
Intel Celeron processor)

Support for up to 2.0-GB
onboard system memory (only
on computer models equipped
with an Intel Celeron processor)

Support for up to 8-GB
maximum on-board
system memory:

●

8192-GB (8192-GB × 1)

●

4096-GB (4096-GB × 1)

√

Storage

Hard drive:

Support for all SATA, 2.5-in
hard drives

Support for Accelerometer hard
drive protection (HP2DCTR)

Support for the following
hard drives:

●

1-TB, 5400-rpm, SATA, 7.2-
mm hard drive

●

500-GB, 5400-rpm, SATA,
7.2-mm hard drive

●

500-GB, 5400-rpm, SATA,
7.0-mm, 8.0-GB NAND
hybrid solid-state
hard drive

√

Chapter 1 Product description

Summary of Contents for Pavilion x360 m1-u000



























































































Search results

Summary of Contents for Pavilion x360 m1-u000

Reviews:

Related manuals for Pavilion x360 m1-u000

Brands by name

Popular brands

HP Pavilion x360 m1-u000, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion x360 m1-u000

Reviews:

Related manuals for Pavilion x360 m1-u000

Brands by name

Popular brands