EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at
EL-MF877-01
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Philips Screw Driver
#2
Torx Head Screw Driver
T10
Socket Wrench
M4
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Disconnect all power cords, including battery connector;
2. Remove top cover;
3. Remove Front panel assy;
4. Remove batery pack;
5. Remove PCBA and TX
6. Final Disassembly
7. Remove Rubber foot Pads
8.
9.
10.
11.
12.
13.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
