manualshive.com logo in svg

HP Pavilion dv9000, Maintenance And Service Manual, Page: 58 / 300

Share
Download
HP Pavilion dv9000 Maintenance And Service Manual Download Page 58

Troubleshooting

Maintenance and Service Guide

2–29

Flowchart 2.13—No OS Loading, Diskette Drive

Replace the following 
components 
individually, retesting 
after each 
replacement:

■

Diskette drive

■

System board

Done

Y

N

Reseat

diskette drive.

OS not loading

from

diskette drive.

Done

Y

Y

Y

Y

Y

Y

Y

N

N

N

N

N

N

N

OS

loading?

Nonsystem

disk message?

Bootable

diskette

in drive?

Install bootable

diskette and

reboot computer.

Check diskette

for system files.

Try different

diskette.

Nonsystem

disk error?

OS

loading?

Boot

from another

device?

Enable drive

and cold boot

computer.

Is diskette

drive boot

order 

correct?

Change boot

priority using

the Setup Utility.

Go to

“Flowchart 

2.17—Nonfunc-

tioning Device.”

Diskette

drive enabled

in the Setup

utility?

Go to

“Flowchart 

2.17—Nonfunctioning 

Device.”

Reset the computer. 

Refer to

Section 1.2, 

“Resetting the 

Computer,”

 for 

instructions.

Summary of Contents for Pavilion dv9000













































































































































































































































































































Reviews:

No comments