HP Pavilion dv8300 Manual Download Page 26

Power

7–1

7

Battery packs

When a charged battery pack is in the computer and the computer 
is not plugged into external power, the computer runs on battery 
power. When the computer is plugged into external AC power, the 
computer runs on AC power. 

If the computer contains a charged battery pack and is running 
on external AC power supplied through the AC adapter, the 
computer switches to battery power if the AC adapter is 
disconnected from the computer.

On select models, the display brightness is automatically 
decreased to save battery life when you disconnect from AC 
power. To increase display brightness, use the 

fn+f8

 hotkey or 

reconnect your AC adapter.

You can keep a battery pack in the computer or in storage, 
depending on how you work. Keeping the battery pack in the 
computer whenever the computer is plugged into external AC 
power enables the battery pack to charge and also protects your 
work in case of a power outage. 

However, battery packs in the computer slowly discharge when 
the computer is turned off. For this reason, the battery pack is not 
shipped inside the computer and must be inserted before the 
computer can run on battery power.

Summary of Contents for Pavilion dv8300











































Reviews: