13–4
Hardware and Software Guide
Setup Utility
Restoring Default Settings in the
Setup Utility
The following procedure explains how to restore the Setup utility
default settings.
1. To open the Setup utility, turn on or restart the notebook in
Windows, and then press
f10
while the prompt, “Press <F10>
to enter setup,” is displayed in the lower-left corner of the
screen.
2. Use the arrow keys to select
Exit > Load Setup Defaults.
3. When the Setup Confirmation is displayed, press
enter
to save
your preferences.
4. To save your preferences and exit the Setup utility, press
f10,
and then follow the instructions on the screen.
The Setup utility default settings are set when you exit the Setup
utility and are in effect when the notebook restarts. Identification
information, including ROM version information, is retained.
Using Advanced Setup Utility Features
This guide describes the Setup utility features recommended
for all users. For more information about the Setup utility
features recommended for advanced users only, refer to the
Help and Support Center, which is accessible only when the
notebook is in Windows. To access the Help and Support Center,
select
Start > Help and Support.
The Setup utility features available for advanced users include a
hard drive self-test, a Network Service Boot, and settings for boot
order preferences.