HP Pavilion dv4 Maintenance And Service Manual Download Page 74

Page: 74 / 141

4–32

Maintenance and Service Guide

Removal and replacement procedures

17. Replace the wireless antenna transceivers and cables, remove the two Phillips PM2.5×3.0 screws

that secure

the transceivers to the display enclosure.

18. Detach the wireless antenna transceivers

from the display enclosure. The transceivers are secured by a foil

wrapping.

19. Remove the wireless antenna transceivers and cables from the clips

built into the display enclosure.

20. Remove the wireless antenna transceivers and cables

from the display enclosure. The wireless antenna

transceivers and cables are available using spare part number 489068-001.

Reverse this procedure to reassemble and install the display assembly.

Summary of Contents for Pavilion dv4














































































































































Search results

Summary of Contents for Pavilion dv4

Reviews:

Related manuals for Pavilion dv4

Brands by name

Popular brands

HP Pavilion dv4, Maintenance And Service Manual

Search results

Summary of Contents for Pavilion dv4

Reviews:

Related manuals for Pavilion dv4

Brands by name

Popular brands