manualshive.com logo in svg

HP Pavilion dm1, Maintenance And Service Manual, Page: 23 / 118

Share
Download
HP Pavilion dm1 Maintenance And Service Manual Download Page 23

Right side

Item

Component

Description

(1)

Digital Media Slot

Supports the following digital card formats:

●

MultiMediaCard

●

SD Card

●

Secure Digital High-Capacity (SDHC) Card

●

Secure Digital Extended Capacity (SDxC) Card

(2)

Audio-out (headphone) jack

Produce sound when connected to optional powered
stereo speakers, headphones, ear buds, a headset, or
television audio.

WARNING!

To reduce the risk of personal injury,

adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information,
refer to the 

Regulatory, Safety, and

Environmental Notices

.

NOTE:

When a device is connected to the jack, the

computer speakers are disabled.

(3)

Audio-in (microphone) jack

Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.

(4)

USB 2.0 ports (2)

Connect optional USB 2.0 devices.

(5)

External monitor port

Connects an external VGA monitor or projector.

(6)

RJ-45 (network) jack

Connects a network cable.

Right side

15

Summary of Contents for Pavilion dm1























































































































Reviews:

No comments