manualshive.com logo in svg

HP PAVILION 15-BC018TX, Maintenance And Service Manual

Share
Download
HP PAVILION 15-BC018TX Maintenance And Service Manual Download Page 62

Fan assembly

Table 5-11

  Fan descriptions and part numbers

Description

Spare part number

Fan assembly for use in models 15-dp0000~0999

L42999-001

Fan assembly for use in models 15-bc300~bc399, 15-bc400~bc499, 15-bc500~bc599

L18458-001

Before removing the fan assembly, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 36

).

2.

Remove the base enclosure (see 

Base enclosure on page 36

).

3.

Disconnect the cable from the battery (see 

Battery on page 38

).

Remove the fan assembly:

1.

Disconnect the fan cables from the system board (1), and then release the display cable from the 
threading channel in the right fan (2).

2.

Remove the four Phillips M2.0 × 4.0 screws from the fans (3), and then remove the right fan (4) and the 
left fan (5) from the computer.

TIP:

The right fan sits on top of the left fan on the shared post between the fans near the heat sink.

Reverse this procedure to install the fan assembly.

IMPORTANT:

When replacing the fans, you must install the left fan first.

 

54

Chapter 5   Removal and replacement procedures for authorized service provider parts

Summary of Contents for PAVILION 15-BC018TX



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands