IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the display assembly, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 42
).
5.
Remove the display panel (see
Display panel on page 44
).
6.
Remove the keyboard (see
Keyboard on page 46
).
7.
Remove the top cover (see
Top cover on page 50
).
8.
Remove the hard drive (see
Hard drive on page 54
).
9.
Remove the USB board (see
USB board/audio jack on page 57
).
10.
Remove the WLAN (see
WLAN module on page 58
).
11.
Remove the system board (see
System board on page 61
).
12.
Remove the display assembly (see
Display assembly on page 78
Remove the display assembly subcomponents:
1.
If it is necessary to replace the webcam/microphone module:
a.
Detach and release the webcam/microphone module as far as the webcam/microphone
module cable allows. (The webcam/microphone module is attached to the back cover with
double-sided tape.)
b.
Disconnect the webcam/microphone cable
(1)
from the webcam/microphone module.
c.
Remove the webcam/microphone module
(2)
.
Component replacement procedures
81
Summary of Contents for Pavilion 14-b100
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...