3.
Remove the WLAN module by pulling the module away from the slot at an angle
(3)
.
NOTE:
The WLAN module is designed with a notch to prevent incorrect installation into
the WLAN module socket.
NOTE:
If the WLAN antennas are not connected to the terminals on the WLAN module,
the protective sleeves should be installed on the antenna connectors, as shown in the following
illustration.
Reverse this procedure to install the WLAN module.
60
Chapter 5 Removal and replacement procedures
Summary of Contents for Pavilion 14-b100
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...