manualshive.com logo in svg

HP Pavilion 11 x360 PC, Maintenance And Service Manual, Page: 28 / 95

Share
Download
HP Pavilion 11 x360 PC Maintenance And Service Manual Download Page 28

Sequential part number listing

Spare part number

Description

690020-005

Ralink RT3290LE 802.11b/g/n 1×1 WiFi and Bluetooth 4.0 Combo Adapter

691740-005

4-GB memory module (PC3L, 12800, 1600-MHz)

693374-005

8-GB memory module (PC3L, 12800, 1600-MHz)

699834-201

Ralink RT3290LE 802.11bgn 1x1 Wi-Fi + BT 4.0 Combo Adapter for use only in Brazil

709848-005

Realtek RTL8188EE 802.11bgn Wi-Fi Adapter

710412-001

65-W HP Smart AC adapter for use in models in Brazil (non-PFC, EM, 4.5-mm, 3 prong)

710662-205

Intel Dual Band Wireless-AC 3160 802.11a/b/g/n/ac (1x1) WiFi and Bluetooth 4.0 combination WLAN
adapter for use in Brazil

714657-001

65-W HP Smart AC adapter (non-PFC, EM, 4.5-mm)

732000-005

500-GB, 5400-rpm, 8 GB hybrid SSD, 7.0-mm

NOTE:

The hard drive bracket, hard drive connector cable, and screws are included in the Hard Drive

Hardware Kit, spare part number 755740-001.

741727-001

45-W HP Smart AC adapter (non-PFC, 4.5-mm, non-slim)

747080-001

External DVD±RW Double-Layer with SuperMulti Drive

748599-001

HP hs3110 HSPA+ Mobile Broadband Module

751875-005

2-cell, 29-Wh, 3.82-Ah, Li-ion battery

752099-005

750-GB, 5400-rpm, 8 GB hybrid SSD, 7.0-mm

NOTE:

The hard drive bracket, hard drive connector cable, and screws are included in the Hard Drive

Hardware Kit, spare part number 755740-001.

753076-005

Broadcom BCM43142 802.11 bgn 1x1 Wi-Fi + BT4.0 HMC Combo Adapter with 1 antenna

755530-001

Power cord for use in North America (3-pin, black, 1.83-m)

755530-011

Power cord for use in Australia (3-pin, black, 1.83-m)

755530-021

Power cord for use in Europe (3-pin, black, 1.83-m)

755530-031

Power cord for use in the United Kingdom and Singapore (3-pin, black, 1.83-m)

755530-061

Power cord for use in Italy (3-pin, black, 1.83-m)

755530-081

Power cord for use in Denmark (3-pin, black, 1.83-m)

755530-111

Power cord for use in Switzerland (3-pin, black, 1.83-m)

755530-201

Power cord for use in Thailand (3-pin, black, 1.83-m)

755530-202

Power cord for use in Brazil (3-pin, black, 1.83-m)

755530-291

Power cord for use in Japan (3-pin, black, 1.83-m)

755530-AA1

Power cord for use in the People’s Republic of China (3-pin, black, 1.83-m)

755530-AB1

Power cord for use in Taiwan (3-pin, black, 1.83-m)

755530-AD1

Power cord for use in South Korea (3-pin, black, 1.83-m)

755530-AR1

Power cord for use in South Africa (3-pin, black, 1.83-m)

20

Chapter 3   Illustrated parts catalog

Summary of Contents for Pavilion 11 x360 PC
































































































Reviews:

No comments