HP P4518A - Traffic Management Server Sa7150, User Manual

Page: 98 / 212

C H A P T E R 5 HP e-Commerce/XML Server Accelerator SA7150 User Guide
88
Port Mapping
Commands
These commands are used to execute the operations described in
Chapter 3’s Mapping and Blocking sections.
Command Definition
create block
Create a block to preclude access to specified IP addresses or
through specified ports. A single IP, a single port, or all ports can
be blocked. If fewer than all ports are to be blocked, you must
repeat the create block command for each one.
Example:
HP SA7150> create block
Client IP to block [0.0.0.0]: 10.1.2.1
Client IP mask [0.0.0.0]: 255.255.0.0
Server IP to block [0.0.0.0]: 20.1.2.1
Server IP mask [0.0.0.0]: 255.255.0.0
Server Port to block: 80
Server Port mask [0xffff]:
HP SA7150>
delete block Delete a block specified by index number. Use show block (see
below) to correlate existing blocks with their numbers.
Example:
HP SA7150> delete block 1
show block
Display all existing blocks.
Example:
HP SA7150> show block
--------
blocks :
---------
(1) block 10.1.2.1 255.255.0.0 20.1.2.1
255.255.0.0 80 0xffff
----------