A-1
Appendix A
Agent Firmware Versions
Appe
ndi
x
A
A
Appendix A
Appendix A contains the following topics:
■
Agent Firmware Versions
■
Preparing Network Devices
■
Globally Assigned IP Network Addresses
■
Configuring IP Parameters
Agent Firmware Versions
HP Hub & Switch Management communicates with network devices using
SNMP (Simple Network Management Protocol).To access device features,
each network device must contain a compatible version of agent software or
firmware.
Note: The latest firmware agents can be obtained from the Support
section of the HP networking Web page. The URL is:
http://www.hp.com/go/network_city
Verifying Device Agent Versions
You can check the agent version on an HP device using one of the following
methods:
■
Use the device’s console port interface (a
non-network
connection).
You can connect a terminal or computer directly to the device or through
a modem. Refer to the device’s
Installation and Reference Guide
for use
of the device’s RS-232 console port.
•
For HP devices, you can use an ASCII terminal or computer with
VT 100 terminal emulation.
■
Use an available network application (a
network
connection).
Summary of Contents for OV-UX
