background image

 

 

8 Startup 

Guide 

To replace a plug-in module ...................................................................................46

 

Installing Additional RAM...........................................................................................49

 

To install a RAM expansion module......................................................................49

 

Replacing the Hard Disk Drive ....................................................................................51

 

To replace the hard disk drive ................................................................................51

 

Troubleshooting and Maintenance.................................................................................53

 

Troubleshooting Your Computer .................................................................................54

 

Display problems ....................................................................................................54

 

Hard disk drive problems .......................................................................................55

 

Keyboard and pointing device problems ................................................................55

 

Performance problems ............................................................................................56

 

Power and battery problems ...................................................................................56

 

Startup Problems.....................................................................................................57

 

Testing the Hardware ...................................................................................................58

 

To run the e-Diagtools diagnostic test....................................................................58

 

Configuring the Computer............................................................................................60

 

To run the BIOS Setup utility.................................................................................60

 

Reinstalling and Updating Software.............................................................................61

 

To recover the factory installation of your hard disk .............................................61

 

To create a Support Utility disk..............................................................................62

 

HP Support and Service ..................................................................................................63

 

Getting Assistance for Your Computer ........................................................................64

 

To get help from the web........................................................................................64

 

To contact HP for support or service......................................................................65

 

To receive repair service.........................................................................................67

 

To prepare your computer for shipment .................................................................68

 

Hewlett-Packard Limited Warranty Statement ............................................................69

 

Reference Information.....................................................................................................71

 

Hardware Specifications...............................................................................................72

 

Safety Information........................................................................................................75

 

Power Cords............................................................................................................75

 

Ergonomics .............................................................................................................76

 

Battery Safety .........................................................................................................76

 

Laser Safety ............................................................................................................77

 

LED Safety .............................................................................................................77

 

Exposure to Radio Frequency Radiation ................................................................78

 

Regulatory Information ................................................................................................79

 

U.S.A. .....................................................................................................................79

 

Canada ....................................................................................................................80

 

European Union ......................................................................................................80

 

Japan .......................................................................................................................82

 

Russia......................................................................................................................82

 

International ............................................................................................................82

 

Index ..................................................................................................................................85

 

Summary of Contents for OmniBook 510
























































































Reviews: