4.
Remove the display assembly
(4)
.
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the two Mylar screw covers
(1)
and the two Phillips PM2.5×4.0 screws
(2)
that
secure the display bezel to the display assembly. The Mylar screw covers are available in
the Display Screw Kit, spare part number 646134-001.
b.
Flex the inside edges of the top edge
(1)
, the left and right sides
(2)
, and the bottom
edge
(3)
of the display bezel until the bezel disengages from the display enclosure.
c.
Remove the display bezel
(4)
. The display bezel is available using the following spare
part numbers:
{
646115-001 — For use with computer models equipped with a webcam and
a microphone
{
646116-001 — For use with computer models equipped only with a microphone
Component replacement procedures
69
