M.2 solid-state drive
Table 5-5
Solid-state drive descriptions and part numbers
Description
Spare part number
128 GB, SATA-3, TLC
L85346-002
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 29
).
2.
Place the computer in Battery Safe mode (
).
3.
Remove the bottom cover (
4.
Remove the battery (
).
Remove the solid-state drive:
1.
Remove the Phillips M2.0 × 2.5 screw (1) that secures the solid-state drive to the computer.
2.
Remove the solid-state drive (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install the solid-state drive.
Component replacement procedures
35
Summary of Contents for mt22
Page 4: ...iv Safety warning notice ...