HP MSM415, Hardware Installation, Page: 8 / 52

Hardware Installation
RF Manager Hardware
Documentation
This guide describes how to install and perform the initial setup of the RF Manager IDS/IPS
Controller and the MSM415 RF Security Sensor. See also, the following documentation:
„ HP ProCurve RF Manager and Sensors Management and Configuration Guide
„
MSM320 Quickstart , for installation and initial configuration information on the MSM325 and
MSM320. For regulatory information see the HP ProCurve MSM3xx / MSM4xx Access Points
Management and Configuration Guide .
„ MSM335 Quickstart , for installation and initial configuration information on the MSM335
Sensor. For regulatory information see the HP ProCurve MSM3xx / MSM4xx Access Points
Management and Configuration Guide .
All documentation is available on the HP ProCurve Manuals web site:
www.hp.com/go/procurve/manuals
RF Manager Hardware
Power, Fault, and Locator LEDs
Port 1 Port 2
Console port LCD display Keypad USB port
Ethernet LEDs
Figure 1. Front view of the RF Manager Controller
LCD Display
Figure 2. RF Manager Controller LCD Display
1-2