HP MSM415, Hardware Installation, Page: 23 / 52

Getting Started
Quick Setup
Important
You need to reboot the Server on completion of the Initialization and Setup Wizard before you
access the Server Console (GUI).
5. Set up the Server DNS Entry. Add a DNS entry wifi-security-server in your organization/
enterprise DNS server. This entry should point to the IP Address of the Server configured
in the Server Initialization and Setup Wizard, sub-step 2, Change the Network Settings.
Adding this entry serves two purposes:
„ Sensors can connect to the Server with zero configuration if they are connected
to a DHCP enabled subnet.
„ You can access the Server using the address https:// wifi-security-server .
6. Access the HP ProCurve RF Manager Console (GUI).
Important
The minimum system requirements to access the RF Manager Console are a laptop with Intel
P4 X86 1.4 GHz Processor, 512 MB RAM, Windows 2000 or XP Operating System, IE 5.5 or
higher, and JRE 1.6 or higher.
a. Type https:// wifi-security-server to access the RF Manager Console. The Console
can take up to 2 minutes to load.
Important
Pop-up blockers (if any) must be disabled on the Web browser. The Reuse windows for
launching shortcuts option in Tools > Internet Options > Advanced should be
deselected in the Internet Explorer Web browser.
b. Click Yes on each of the Security Alert/Warning pop-up screens.
c. Browse to the location of the license key file and select it.
2-3