Server Configuration and Utilities
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
8-11
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: i-ch8 Server Configuration and Utilities.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 3:19 PM
Redundant ROM Support
The HP ProLiant ML530 Generation 2 server enables you to upgrade or configure
your ROM safely with redundant ROM support. The server has a ROM image that
acts as two separate 1-MB ROMs. In the standard implementation, one section of the
ROM contains the most current ROM version, while the other section of the ROM
contains a previous version.
When the server boots, the system identifies whether the current ROM bank is
corrupt. If a corrupt ROM is detected, the system boots from the backup ROM and
alerts you through POST or IML that the ROM bank is corrupt.
There are two methods of accessing the redundant ROM:
•
Switching to the backup ROM through RBSU
•
Manually forcing to the backup ROM through the system maintenance
switch (SW4)
Switching to the Backup ROM Through the ROM-Based Setup
Utility
Use ROMPaq utilities to create a backup ROM image before upgrading the
configuration or to restore saved ROM data.
1.
Access RBSU by pressing the
F9
key during power up when the prompt displays
in the lower right corner of the screen.
2.
Select
Advanced Options.
3.
Select
ROM Selection.
4.
Select one of the ROM banks as the system ROM.
5.
Press the
Enter
key.
6.
Press the
Esc
key to exit the current menu, or press the
Esc
key, then press the
F10
key at the prompt to exit RBSU.
7.
Restart the server.