HP MediaSmart Frame 100, User Manual

Page: 32 / 35

26 HP MediaSmart Frame User Guide
Cleaning and Care Tips
„
Please power off the HP MediaSmart Frame before cleaning.
„
DO NOT spray or pour liquid cleaning agents directly on the screen or frame.
„ DO NOT use ammonia, alcohol, or abrasive detergent cleaning agents.
Cleaning the Screen:
1 Wipe screen with a clean, soft, lint-free cloth to remove dust and loose particles.
2 If further cleaning is required, apply an appropriate cleaning agent (approved for LCD
displays) to a clean, soft, lint-free cloth and wipe the screen.
NOTE: Do not apply too much pressure on the screen to avoid damaging it.
Cleaning the HP MediaSmart Frame and Backing:
1 Use a clean, soft, lint-free cloth to remove dust and loose particles.
2 If desired, apply an appropriate cleaning agent to a clean, soft, lint-free cloth and wipe
the appropriate surfaces.
Maintenance Guidelines
To enhance the performance and extend the life of the unit:
„ Do not open the unit or attempt to service this product yourself. If the unit is not
operating properly or has been dropped or damaged, contact your Hewlett-Packard
authorized dealer, reseller, or service provider.
„ Adjust only those controls that are described in the operating instructions.
„ Keep the unit in a well-ventilated area, away from excessive light, heat, or moisture.
„ Slots and openings in the cabinet are provided for ventilation. These openings must not
be blocked or covered.
„
Never push objects of any kind into cabinet slots or other openings.
„
Unplug the unit from the power outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners.
„ Do not drop the unit or place it on an unstable surface.
„ When removing the picture stand, you must lay the monitor face down on a soft area to
prevent it from getting scratched, defaced, or broken.