HP Linear Barcode Scanner II, Programming Reference Manual

Page: 218 / 306

Enter/Exit Programming Mode Codablock F
208 Programming Reference Guide
Codablock F AIM Check
Specifies if Check Digit calculation algorithm is AIM compliant or not.
Codablock F Length Control
This feature specifies either variable length decoding or fixed length decoding
for the Codablock F symbology.
Variable Length:
For variable length decoding, a minimum and maximum length
may be set.
Fixed Length:
For fixed length decoding, two different lengths may be set.
$CCFAC00 
Codablock F AIM Check = Not AIM compliant
$CCFAC01 
Codablock F AIM Check = AIM compliant
DEFAULT
$CCFLC00 
Codablock F Length Control = Variable Length
$CCFLC01 
Codablock F = Fixed Length
DEFAULT