HP Linear Barcode Scanner II, Programming Reference Manual

Page: 151 / 306

Symbologies Enter/Exit Programming Mode
Programming Reference Guide 141
I 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for I 2 of 5 Length Control on
page 139 . Length 2 is the maximum label length if in Variable Length Mode, or
the second fixed length if in Fixed Length Mode. The length includes the bar
code’s check and data characters.
The length can be set from 2 to 50 characters in increments of two. A setting of
0 specifies to ignore this length (only one fixed length). See "Set Length 2" on
page 258 for more detailed programming instructions.
$CI2L2
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters