HP LD4210 User Manual Download Page 81

Page: 81 / 160

Saving and loading display configuration

All display settings set in HP Network Sign Manager can be saved as a file. You can import the saved
settings later when necessary.

Saving display configuration

The following describes how to save the current display settings:

Right-click a display for which the settings are to be saved.

Click

Save Configuration

from the shortcut menu. The

Save As...

dialog appears.

Enter a file name, and then click

Save

. The

Finish Save Configuration

message appears when

it is successfully saved.

Loading display configuration

You can import (load) the saved settings to restore the display settings easily.

The following describes how to import the saved display settings.

Right-click a display for which the settings are to be imported and restored.

Click

Load Configuration

from the shortcut menu. The

Open

dialog appears.

Select the display settings file to import, and then click

Open

. The selected settings are imported

for the display, and the

Load Configuration Status

dialog shows the progress. The

Configuration load complete

message appears when they are successfully imported.

Chapter 6 Installing HP Network Sign Manager

ENWW

2nd Draft

Summary of Contents for LD4210

































































































































































Search results

Summary of Contents for LD4210

Reviews:

HP LD4210, User Manual, Page: 81 / 160

Search results

Summary of Contents for LD4210

Reviews: