The NiMH batteries will not charge.
●
Try charging the batteries again after they have drained awhile.
●
Use only the approved HP AC power adapter.
●
If charging the batteries in the HP quick recharger or the spare battery charging bay
of an optional HP Photosmart dock does not work, replace the batteries.
The camera does not turn on when I connect to AC power, then disconnect, then
reconnect.
●
Insert batteries into the camera.
●
Reset the camera (see
Resetting the camera
on page 32
).
●
The AC power adapter could be malfunctioning. Try connecting to a different
compatible AC power adapter.
●
Try plugging the AC power adapter into a different electrical outlet.
The camera does not respond when I press a button.
●
Turn on the camera.
●
Most of the camera buttons do not respond when the camera is connected to a
computer (directly or through an optional dock).
●
Replace or recharge the batteries.
●
Reset the camera (see
Resetting the camera
on page 32
).
●
Check to see if the memory card is defective. If so, replace the memory card.
●
Format the internal memory and/or the memory card (see
Install and format an
optional memory card
on page 8
).
The camera does not take a picture when I press the Shutter button.
●
Press the
Shutter
button all the way down.
●
The memory card or internal memory may be full. Transfer images from the camera
to your computer, then format the internal memory or the memory card (see
Install
and format an optional memory card
on page 8
). Or replace the card with a new one.
●
The camera may be processing. Wait a few seconds for the camera to finish
processing the last image before taking another picture.
The Image Display is not working.
●
The Image Display may have timed out. Press any camera button to wake up the
camera.
●
Replace or recharge the batteries. If the Image Display does not turn on, remove
the batteries and connect to AC power (directly or through the optional dock). If the
Image Display still does not turn on, reset the camera (see
Resetting the camera
on page 32
).
My image is blurry.
●
Use
Focus Lock
(see
Using Focus Lock
on page 13
).
●
Use a tripod to hold the camera steady, or improve lighting conditions.
●
Set the flash to
Auto Flash
or
Flash On
and set the shooting mode to
Action
.
HP Photosmart M425/M525 Digital Camera
33
