HP Kayak XU700, Installation Manual

Page: 14 / 199

1 Installing Your Multimedia Sound Kit
Installing the Accessory Software under Windows NT 4.0
6 English
Installing the Accessory Software under
Windows NT 4.0
If your system runs Windows NT 4.0, you need to install the accessory
software as described here.
Installing the CD-ROM Driver
Windows NT

4.0 automatically detects the CD-ROM drive and loads
the required software driver when you switch on your PC.
Installing the Sound Board Drivers
To install the sound board drivers, complete the following steps.
1 With Windows NT running, insert the HP Multimedia Sound CD in
the CD-ROM drive. (Insert the CD label side up; press the open/close
pushbutton to open and close the drawer.)
2 Click on the Start button, point to Settings, then click on Control
Panel.
3 Double-click on the Add/Remove Programs icon .
4 Click on the Install... button, and then the Next button.
5 Type
d:\winnt\setup
and then click on the Finish button. Follow
the instructions that appear on the screen.
(The CD-ROM drive may be your E drive. In this case you would
enter
e:\winnt\setup
. You can check by clicking the Browse
button in the Run Installation Program dialog box, and then
browsing to the CD-ROM drive.)
6 When the driver has been installed, you see the 16-bit Audio Board
Setup window.
7 Click on the OK button.
8 Restart the computer.
bolero~1.boo : bolgallu.fm Page 6 Tuesday, April 22, 1997 10:26 AM