8
Syslog via TCP
■
Enhancement (PR_0000058564)
—Adds the ability to send syslog messages via TCP. For more information, see
“Debug/Syslog Operation” in the “Troubleshooting” appendix of the
Management and Configuration Guide
for your
switch.
Set sFlow Agent Address
■
Enhancement (PR_0000073083, CR_0000077874)
—This feature adds
sflow
as an option to the existing
ip source-
interface
command, which provides the ability to specify the sFlow source agent address that is included in the packets
sent from the switch to the sFlow collection nodes.
Multicast
Support for Additional RPs and Multicast Groups
■
Enhancement (PR_0000070869)
—The administrator is now able to configure 8 static Rendezvous Points (RPs)
and 8 multicast group ranges per static RP in PIM-SM mode. For more information, see the “PIM-SM” chapter in the
Multicast and Routing Guide
for your switch.
MLDv2
■
Enhancement (PR_0000071588)
—IGMP v3 and MLD v2 capabilities were added to the switch. For more
information, see the “Multicast Listener Discovery (MLDv1 and MLDv2)” chapter in the
IPv6 Configuration Guide
for your switch.
Override Reverse Path Forward (RPF) Lookup
■
Enhancement (PR_0000066432)
—Adds the ability to override the normal Reverse Path Forward (RPF) lookup
mechanism so the router can accept multicast traffic on an interface other than that which would be normally selected.
See “PIM-SM (Sparse Mode)” in the
Multicast and Routing Guide
.
PIM CLI enhancements
■
Enhancement (PR_0000068123)
—Enhanced the
router pim
command. For more information, see the “PIM-DM
(Dense Mode)” and “PIM-SM (Sparse Mode)” chapters in the
Multicast and Routing Guide
for your switch.
OSPF
OSPF Neighbor Shutdown Notification
■
Enhancement (PR_0000065022)
—Provides a way to gracefully shut down OSPF routing on HP switches without
losing packets that are in transit. For more information, see the chapter “IP Routing Features” in the
Multicast and
Routing Guide
for your switch.
Define Cost of LSA Type 3 Summarized Prefix
■
Enhancement (PR_0000065218)
—Provides a way to define a fixed, user-assigned cost of an OSPF LSA type 3
summarized prefix. For more information, see the section “Configuring OSPFv3 on the Routing Switch” in the
IPv6
Configuration Guide
for your switch.
OSPF LSA Type 3 Summarized Prefix Cost
■
Enhancement (PR_0000071947)
—Define OSPF LSA Type 3 Summarized Prefix Cost for OSPF v3. For more
information, see the “Introduction to OSPFv3” chapter in the
IPv6 Configuration Guide
for your switch.
Summary of Contents for J9573A
Page 1: ...HP 3800 Switches Software Version KA 15 10 0022 Release Notes ...
Page 34: ...32 ...
Page 35: ......
