HP J3168A User Manual Download

Page: 95 / 110

Technical Specifications D-1

Technical Specifications

General

All specifications are subject to change without prior notice.

Dimensions

• Height: 1.7 in (4.3 cm)

• Width: 5.9 in (14.9 cm)

• Depth: 8.8 in (22.4 cm)

Weight

• 1.5 lbs (0.7 kg)

Internal
Components

• 32-bit RISC controller

• 2 Mbytes RAM

• 2 Mbytes flash memory for firmware updates.

Firmware
Updates

(Flash memory allows you to download the latest
firmware to update your CD-ROM server operation.)
• Requires FTP (file transfer protocol) on a TCP/IP

network.

Supported
CD-ROM
Drives

• Up to 7 SCSI CD-ROM drives.

• Disc changers (up to 8 discs each) are supported.

Up to 56 CD-ROM discs are supported through
LUN (Logical Unit Number) addressing.

(CD-R writers are not supported)

File Systems

The following CD-ROM file systems are supported:
High Sierra (HSF), ISO 9660, Multisession and ISO
9660 with Rock Ridge extensions.

hp.book Page 1 Thursday, April 2, 1998 4:33 PM

Summary of Contents for J3168A














































































































Search results

Summary of Contents for J3168A

Reviews:

Related manuals for J3168A

Brands by name

Popular brands

HP J3168A, User Manual

Search results

Summary of Contents for J3168A

Reviews:

Related manuals for J3168A

Brands by name

Popular brands