HP J2415A, Installation And Reference Manual

Page: 33 / 116

Connecting an Ethernet/IEEE 802.3 LAN
A Hub-14 can be connected to an Ethernet or IEEE 802.3 10 Mbit/s network.
To connect to an Ethernet/IEEE 802.3 LAN, the hub must contain the
following accessory products:
HP J2414B 100VG/ET SNMP/Bridge Module installed in the 100VG
Expansion Slot in the back of the hub, and
One of the following Ethernet/IEEE 802.3 Transceiver modules installed
in the “AUI/Xcvr Slot” on the module:
•
HP J2606A Fiber-Optic Transceiver for 10Base-FL
•
HP J2607A Twisted-Pair Transceiver for 10Base-T
•
HP J2608A ThinLAN Transceiver for 10Base2
•
HP J2609A AUI Port for external transceivers
Refer to the installation instructions supplied with these products for
installation and network connection instructions.
The HP J2414B SNMP/Bridge Module installed in the hub’s expansion slot
provides the bridge functionality between the 100 Mbit/s and 10 Mbit/s
networks.
The transceiver module provides the physical interface its respective
Ethernet/IEEE 802.3 network medium.
In
s
ta
ll
in
g
t
h
e
H
P
A
d
v
a
n
c
e
S
ta
c
k
H
u
b
Installing the HP AdvanceStack Hub
1-19