manualshive.com logo in svg

HP iPAQ rx1900, Supplementary Manual, Page: 11 / 99

Share
Download
HP iPAQ rx1900 Supplementary Manual Download Page 11

3

Charging the Battery with the HP Desktop Cradle and USB 

Cable

An alternative method of charging the HP iPAQ is to charge the device by 
using a USB cable. However, because this charging method drains the 
host battery (i.e., laptop), you must enable USB charging 

on the HP 

iPAQ 

before you can charge the device.

To charge your HP iPAQ using the HP Desktop Cradle and USB Cable:

1.

Turn on USB charging by tapping 

Start

 > 

Settings

 > 

System

 

tab > 

Power

 on the HP iPAQ.

2.

Select the 

USB Charging

 tab, and then check 

Use USB 

Charging.

3.

Tap 

OK

 once USB Charging has been enabled.

4.

Connect one end of the USB sync cable to the bottom of the 
HP iPAQ.

5.

Connect the USB cable to an available USB port on your USB 
powered device, such as a laptop computer.

NOTE: 

The HP iPAQ charges slower when using an USB cable than with 

an AC Adapter.

If the battery won’t stay charged, try the following:

•

Always keep the HP iPAQ connected to the AC Adapter when you 
are not using it.

•

In the backlight settings, adjust the bar to a lower level to conserve 
more battery power.

•

Turn off Bluetooth and Wi-Fi when not in use.

Summary of Contents for iPAQ rx1900




































































































Reviews:

No comments