Ability to scan a cell board while the system is running. (only available for partitionable
systems)
Implementation of management processor commands for security across partitions so that
partitions do not modify system configuration. (only available for partitionable systems)
General Site Preparation
General Site Preparation
General Site Preparation
General Site Preparation
Rules
Rules
Rules
Rules
AC Power Requirements
AC Power Requirements
AC Power Requirements
AC Power Requirements
The modular, N+1 power shelf assembly is called the Front End Power Subsystem (FEPS). The
redundancy of the FEPS is achieved with 6 internal Bulk Power Supplies (BPS), any five of which can
support the load and performance requirements.
Input Options
Input Options
Input Options
Input Options
Reference the Site Preparation Guide for detailed power configuration options.
Input Power Options
Input Power Options
Input Power Options
Input Power Options
PDCA
PDCA
PDCA
PDCA
Product
Product
Product
Product
Number
Number
Number
Number
Source
Source
Source
Source
Type
Type
Type
Type
Source Voltage
Source Voltage
Source Voltage
Source Voltage
(nominal)
(nominal)
(nominal)
(nominal)
PDCA
PDCA
PDCA
PDCA
Required
Required
Required
Required
Input Current
Input Current
Input Current
Input Current
Per Phase
Per Phase
Per Phase
Per Phase
200-240 VAC
200-240 VAC
200-240 VAC
200-240 VAC
Power Required
Power Required
Power Required
Power Required
A5800A
Option 006
3-
phase
Voltage range
200-240 VAC,
phase-to-phase,
50/60 Hz
4-wire
44 A
Maximum per
phase
2.5 meter UL power cord and OL
approved plug provided. The
customer must provide the mating in
line connector or purchase quantity
one A6440A opt 401 to receive a
mating in line connector. An
electrician must hardwire the in-line
connector to 60 A/63 A site
power.
a,b,c
A5800A
Option 007
3-
phase
Voltage range
200-240 VAC,
phase-to-neutral,
50/60 Hz
5-wire
24 A
Maximum per
phase
2.5 meter <HAR> power cord and
VDE approved plug provided. The
customer must provide the mating in
line connector or purchase quantity
1 A6440A opt 501 to receive a
mating in-line connector. An
electrician must hardwire the in-line
connector to 30 A/32 A site
power.
a,b,d
a. A dedicated branch is required for each PDCA installed.
b. In the U.S.A, site power is 60 Amps; in Europe site power is 63 Amps.
c. Refer to the Option 006 Specifics Table
Option 006 Specifics Table
Option 006 Specifics Table
Option 006 Specifics Table for detailed specifics related to this option.
d. In the U.S.A. site power is 30 Amps; in Europe site power is 32 Amps.
Option 006 and 007 Specifics
Option 006 and 007 Specifics
Option 006 and 007 Specifics
Option 006 and 007 Specifics
****
QuickSpecs
HP Integrity Superdome Servers 16-socket, 32-socket,
HP Integrity Superdome Servers 16-socket, 32-socket,
HP Integrity Superdome Servers 16-socket, 32-socket,
HP Integrity Superdome Servers 16-socket, 32-socket,
and 64-socket
and 64-socket
and 64-socket
and 64-socket
Configuration
DA - 11717 Worldwide — Version 20 — May 3, 2005
Page 27
