HP Indigo 5000, Preventive Maintenance Manual

Page: 6 / 18

2 Million Imp - Preventive Maintenance Guide - HP Indigo press 5000
CA294-00570 rev 01 page 6 of 18
2 million imp. maintenance
NOTE: To be performed together with the monthly routines.
Date: Time spent:
HP Indigo press 5000 S/N: Service person:
Customer name: Country/State:
Required parts
ˆ
Complete CE kit. See page 12.
ITM drum
ˆ
ˆ
ˆ
Check the bias carbon brush on the rear wall, and
replace, if required.
Check the ITM overheat thermal fuse carbon brushes
on the front wall, and replace, if required.
Make sure that the housing did not come loose from
the press wall.
Note : See "Conditional replacement" on page 12.
PIP drum
ˆ
ˆ
Check the grounding brush, and replace, if required.
Check the condition of the SofSub (PIP underlayer).
IMP drum
ˆ
ˆ
Replace the gripper clamps.
Check the grippers magnet gap, and adjust as
required.
Cleaning station
ˆ
ˆ
Replace the sponge roller.
Check the drive belt tension.
Paper transport
ˆ
ˆ
ˆ
ˆ
ˆ
ˆ
Clean all rollers and sensors.
Clean paper path.
Clean Feeder elastic bridge conveyor belts with IPA.
Clean Feeder drawer tray.
Clean paper transport sensors.
Replace exit roller and springs.