HP HSR6602-G, Installation Manual

Page: 88 / 107

82
Table 38 FIP-10 specifications
Item Specification
HIM Not supported
MIM 4 MIMs supported at the same time
Hot-swapping Supported
Slot Four
FIP-20
You can plug up to two HIMs or two MIMs into the FIP-20. The FIP-20 also supports intermix of a HIM and
a MIM.
Figure 72 FIP-20 front panel
(1) Slot 2 (2) Slot 1 (3) Status LED (4) OPEN BOOK mark
The OPEN BOOK mark indicates that the operator must read the following sections before working with
the FIP:
Table 39 References for FIP operations
Operation Reference
Install and remove the FIP See “ Installing a FIP module ” and “ Replacing a FIP module .”
Install and remove interface
modules
See “
错误！未找到引用源。
”, “ Installing a HIM /MIM”,
错误！未找到引用
源。
, and “ Replacing a HIM /MIM.”
Connect network cables See “ Connecting an Ethernet cable .”
Connect optical fibers See “ Connecting a fiber cable .”
Table 40 FIP-20 specifications
Item Specification
HIM 2 HIMs supported
MIM 2 MIMs supported
Hot swapping Supported
Interface module slot 2