HP HPE VAN SDN Controller 2.7 Administrator'S Manual Download Page 127

Page: 127 / 231

◦

Never let someone who does not have access rights to the controller ‘look over your
shoulder’ while accessing the UI.

◦

Make sure Keystone is configured to expire tokens after a short period of time (a common
industry practice is 20 minutes).

•

Do not delete any iptables with the name

hazelcast

cassandra-default

, or

cassadra-team

, or any rules with the following ports: 5700, 7000, 7001, 7199, 9160.

•

Do not manually override the iptables rules to allow or deny ports 5700, 7000, 7001, 7199,
and 9160.

Example 1 “Rules created for a team of 3 controllers”

displays the rules created for a team of 3

controllers (1.2.1.1, 1.2.1.2, 1.2.1.3) when running the

sudo iptables -nL

command:

Example 1 Rules created for a team of 3 controllers

# sudo iptables -nL

Chain INPUT (policy ACCEPT)
target

prot opt source

destination

cassandra-team

all

0.0.0.0/0

cassandra-default

all

0.0.0.0/0

hazelcast

all

0.0.0.0/0

Chain FORWARD (policy ACCEPT)
target

prot opt source

destination

Chain OUTPUT (policy ACCEPT)
target

prot opt source

destination

cassandra-team

all

0.0.0.0/0

cassandra-default

all

0.0.0.0/0

hazelcast

all

0.0.0.0/0

Chain cassandra-default (2 references)
target

prot opt source

destination

tcp

127.0.0.1

tcp dpt:7001

tcp

127.0.0.1

tcp dpt:9160

tcp

127.0.0.1

tcp dpt:7199

DROP

tcp

0.0.0.0/0

tcp dpt:7199

DROP

tcp

0.0.0.0/0

tcp dpt:9160

DROP

tcp

0.0.0.0/0

tcp dpt:7000

DROP

tcp

0.0.0.0/0

tcp dpt:7001

Chain cassandra-team (2 references)
target

prot opt source

destination

tcp

1.2.1.2

1.2.1.3

tcp dpt:7001

tcp

1.2.1.3

1.2.1.2

tcp dpt:7001

tcp

1.2.1.1

1.2.1.3

tcp dpt:7001

tcp

1.2.1.3

1.2.1.1

tcp dpt:7001

tcp

1.2.1.3

tcp dpt:7001

Chain hazelcast (2 references)
target

prot opt source

destination

tcp

1.2.1.2

1.2.1.3

tcp dpt:5700

tcp

1.2.1.3

1.2.1.2

tcp dpt:5700

tcp

1.2.1.1

1.2.1.3

tcp dpt:5700

tcp

1.2.1.3

1.2.1.1

tcp dpt:5700

DROP

tcp

0.0.0.0/0

tcp dpt:5700

Security best practices

127

Summary of Contents for HPE VAN SDN Controller 2.7








































































































































































































































Search results

Summary of Contents for HPE VAN SDN Controller 2.7

Reviews:

HP HPE VAN SDN Controller 2.7, Administrator'S Manual, Page: 127 / 231

Search results

Summary of Contents for HPE VAN SDN Controller 2.7

Reviews: