44
Appendix A Chassis views and technical
specifications
Chassis views
HPE 5930-32 QSFP+/HPE 5930-32 QSFP+ TAA
Figure 50 Front panel
(1) QSFP+ port
(2) QSFP+ port LED
(3) System status LED (SYS)
Figure 51 Rear panel
(1) Grounding screw (auxiliary grounding point 2)
(2) Management Ethernet port
(3) Serial console port
(4) Fan tray slot 1
(5) Fan tray slot 2
(6) Power supply slot 1
(7) Power supply slot 2
(8) USB port
(9) USB mini console port
(10) LINK LED for the management Ethernet port
(11) ACT LED for the management Ethernet port
The HPE 5930-32 QSFP+/HPE 5930-32 QSFP+ TAA switch comes with the two power supply slots
empty and a filler panel as an accessory. You can install one or two power supplies for the switch as
needed. In
, two 650W AC power supplies are installed in the power supply slots. For more
information about installing and removing power supplies, see "
Installing/removing a power supply
The HPE 5930-32 QSFP+/HPE 5930-32 QSFP+ TAA switch comes with the two fan tray slots empty.
You must install two fan trays of the same model for the switch. In
, two LSWM1HFANSC
fan trays are installed in the fan tray slots. For more information about installing and removing fan
trays, see "
