HP HP 9000 Series 800t, System Installation Manual

Page: 21 / 33

13
Addendum to D Class Enterprise Servers System Installation Guide
Installation
20 Install the emblem insert and door removed from the standard bezel (ref. Step 3)
onto the wide bezel (item 14) shown below.
21 Remove handles from the wide bezel and position it onto the bezel mounts at-
tached to the rack.
22 Apply lock label (item 15) to the front door where shown.
23 Secure the bezel to the bezel mounts with the cover plates (item 10, 2 places)
shown in the illustration.
Figure 6. Seismic Rack Installation
24 Route all cables to allow unrestricted movement of the assembly when sliding in
and out. Attach wires to cable retractor (Figure 3 item 26) using cable ties (Figure
3 item 27).